Hello SJCAM M10+ Users,
Version 1.6 has been released for the SJCAM M10+ Plus 2K Gyro action cam. If your camera is working fine then please do not flash your unit.
This version improves on Gyro (Same as v1.5). Remember to check out the instructions on how to flash as this version has a Loader file that needs to be installed first.
Firmware link: SJCAMM10_M10+_SJCAM_LOGO_151104_V1.6_不带U盘保护_1
Warning: Once the M10+ Plus firmware has been updated to Version 1.5, DO NOT flash lower firmware versions (for example, cannot flash v1.3, v1.4). This firmware is only for M10+ units with Versions v1.5 and below. If you revert back to a firmware version lower than v1.5 (like v1.3, v1.4), you will brick your unit and camera and it will have a black screen.
Please watch this video tutorial first: https://www.youtube.com/watch?v=y4rAE7-ugkw
For any other support questions, please checkout our support forum here
SJCAM Team
5 thoughts on “SJCAM M10+ Plus v1.6 Firmware Upgrade”
All the real problems remain after updating 1,6 version. What news???
720p 120fps – NOT WORK
VGA 240 fps – NOT WORK
i think it is more big problem then gyro which normal worked in 1,5 version
Please try using a different memory card.
We should have a v1.7 coming out very soon. Thank you for your patience
v1.6 Still displays ‘NoImage’ when using 64GB mem card. If you connect it as mass storage to PC then you can see the photos and videos are there so it is recording the information, however you cannot play back on the M10+ itself. Note: I formatted the card within the camera menu (exFAT) because my Windows reported that the destination was too big for FAT32 (as is a suggested work-around for other SJCam with the same issue). Can the 1.7 firmware please add support for SD cards larger than 32GB (i.e. 64GB, 128GB, etc). Thanks
Matthew
It will support some cards… Please check our FAQ page as we have supported cards there.
https://dashcamtalk.com/forum/threads/sjcam-64gb-128gb-memory-cards-compatibility-list.14627/
if this does not help, you can open a ticket here:
https://sjcamsupport.freshdesk.com
Please open a support ticket here: https://sjcamsupport.freshdesk.com