SJCAM M10+ Plus v1.5 Firmware, Tutorial & Changelog – Must Read!

SJCAM M10+ Plus v1.5 Firmware, Tutorial & Changelog – Must Read!

October 22, 2015 News

    Hello SJCAM M10+ Users & Resellers,   The M10+ Plus 2k Gyro Version 1.5 (v1.5) has been released with several crucial updates.   This being said, SJCamHD.com has make a written tutorial and video tutorial to make sure that your upgrade process goes smoothly.   To make sure that everything with your upgrade goes well, we will post several warnings in this post and inside of the tutorial.   Please read the tutorial carefully and watch the video before upgrading your Firmware.   Warning: Once the M10+ Plus  firmware has been updated to Version 1.5, DO NOT  flash lower firmware versions (for example, cannot flash v1.3, v1.4). This firmware is only for M10+ units with Versions v1.5 and below. If you revert back to a firmware version lower than v1.5 (like v1.3, v1.4), you will brick your unit and camera and it will have a black screen.   SJCAM M10+ 2K Gyro v1.5 Changelog: 1, Fixes the Duplicate License Plate Number watermark issue under “LicenseNoSet” menu option. Also fixes the license mark not being removed when option is deselected. 2,Fixes issue when after the unit has been powered off, then powered back on again, the Gyro settings need to be reset. Adds a Gyro Sensor Quick Key – when using M10+ to record or take pictures, gently press the shutter button to switch the Gyro off/on. Press the button down longer for Zoom. 3, Improves automatic white balance (AWB) 4,Fixes left side of the screen has a line issue. 5,Enhances Wifi signal strength and improves Wifi signal stability. Download Link 1 (Tutorial): MUST_READ_SJCAM_M10+_Gyro_v1.5_Firmware_Upgrade_tutorial   Download Link 2 (Firmware Package): SJCAM_m10+_v1.5_firmware_package   The below video tutorial shows the upgrade process for the SJ4000+ v2.5 firmware which is exactly the same as the M10+ v1.5. Steps are the same but the Firmware file name is different.   If you have any support questions for the M10+ Plus firmware upgrade process or other tech support questions, please contact us directly at support@sjcamHD.com   Thanks,   SJCAM Team