SJ6 Legend Latest Firmware

Discussion in 'SJ6 LEGEND Firmware' started by sjcam_admin, Mar 9, 2017.

  1. sjcam_admin

    sjcam_admin Administrator Staff Member

    Feb 23, 2017
    Likes Received:
    Trophy Points:
    SJ6 Legend Firmware v1.4.4

    Since the release of the new version of our mobile App you can now simply install the App on your mobile device, connect to your camera and you will be prompted to update the camera firmware automatically. If for any reason this process fails please contact us at and we will help You to update the camera firmware manually. To download the newest version of our mobile App simply go to on your phone and click on the download link according your phone's operating system.

    Firmware version v1.4.4


    To update the firmware of the camera using the APP, follow the instructions below:

    1. Download & Install the SJCAM Zone app.
    2. Turn on the camera's WiFi
    3. Connect your mobile to the camera's WiFi
    4. Open the SJCAM Zone APP

    5. Select the Camera icon.

    6. The camera will ask you to update the firmware, accept and follow the instructions.


    To update the firmware manually use the following method:

    1. Turn off the camera and extract the memory card.
    2. Connect the memory card to the computer and format it under FAT32. If it is not formatted under FAT32, the update won't happen.
    3. Copy the attached files into the card (LD96660A.bin and SJ6CAM.bin)
    4. Insert the card into the camera
    5. Connect the camera to the wall charger and wait until the update process finishes (The lights will be blinking during the update)
    6. Once the camera is turned on, format the card again in Settings - Format, otherwise, the next time you turn on the camera the firmware will be reinstalled again.

    Before the firmware update, please make sure to use a high quality class 10 memory card, a list of supported cards can be found here:

    Last edited: May 25, 2017

Share This Page