SJ6 LEGEND LATEST FIRMWARE VERSION 1.4.6 (JUNE 2017)

SJ6 LEGEND LATEST STABLE FIRMWARE VERSION 1.4.6 (JUNE 2017)


---------------------------------------------------------------------------

Follow these steps to install the new firmware v1.4.5:

1. Extract the memory card form your camera.

2. Format the memory card to FAT32 in your computer. NOTE: If the card is nor formatted to FAT32 the update may not happen.





3. Go to the bottom of this page, look for the firmware file SJ6CAM.bin, then download and save it to your computer.

4. Copy the file to your card, then insert the card back to your camera.
5. Make sure you have more than enough power on your battery, then press the power button for 3-5 seconds.
6. Wait for 2-3 minutes for the update to finish, it will show the SJCAM logo when it is finished.

NOTE:
On SJ6 Legend cameras that have not been updated before, you might need to install the Loader file first, for the update to work.
Please install the file LD9666.bin found at the bottom of this page first. Then follow all the procedures above again.



********************************************************************************************
SJ6 v1.4.6 Changelog:

1. Re-adds upgrading firmware via SJCAMZone App
2. Fixes screen does stay off when selected off and unit is rebooted.
3. Adds menu wheref now set WIFI SSID and wifi passwords SJ6 V1.4.6
4. Fixes screen does stay off when selected off and unit is rebooted.
5. Adds menu wheref now set WIFI SSID and wifi passwords
6. Fixes 720p and APP issue which cause camera to crash.
5. Adds in underwater mode, press OK for more than 2 seconds to switch to quick menu mode.
7. Fixes when Gyro turned on, distortion correction icon will not be displayed.
8. Updates so that when press power button down long, the camera will turn on first, then the lights blink.
9. Fixes when distortion correction is on and sharp picture is selected, sometimes fisheye correction doesn’t work.
10. Frame Lock option will be added in low light mode. menu to add low-light mode. When in low light frames will not drop.
11. IQ effect optimization: the overall effect of bright (note open “low-light mode” to see the obvious changes in brightness)
12. Loop video record default set to 3 minutes.
13. Adds Digital Zoom (DZOOM) function. (note DZOOM and some features conflict, when there is no conflict when the main interface DZOOM function button appears)
14. Resolves the freezing issue due to VGA resolution not supporting fish eye correction.
15. Fixes battery icon issue where when switched from photo to record, icon shows battery is full.
16. In car mode, unplug the charger and a delay of 10 seconds is added before shutoff.
When Not in car mode. Unplug the charger and the camera does not turn off
***********************************************************************************************

 

@Ken J,
Updated, thanks!