Discussion in 'SJ6 LEGEND Firmware' started by sjcam_admin, Sep 11, 2017.

  1. sjcam_admin

    sjcam_admin Administrator Staff Member

    Feb 23, 2017
    Likes Received:
    Trophy Points:
    Go to the Firmware download link on the official support center HERE.

    SJ6 Legend AIR FW V1.2.4 Changelog:

    1. Fixes bug when connected to HDMI, the touch screen can not operate, so can not enter the playback.

    2. Fixes after connecting HDMI, then shutting down, turn off the LOGO displays at 90 degrees

    3. Adds wizard quick guide: Restore the default settings or upgrade and after the first boot, there will be a touch wizard will appear.

    4. Adds function: to restore the default settings, return to normal video mode, and prompted to touch the wizard

    5. Fixes when in FPV mode and connect HDMI, the unit freezes due to HDMI AV-out not being able to operate at the same time. Now only one video stream output can be selected at time.

    6. Adds ISO 3200 manual control

    7. Fixes the screen freezing when card becomes full in loop record mode.

    8. Optimize the function can not be effective at the same time, the menu to increase the gray background, such as open the gyroscope, FOV and fish eye correction menu becomes gray, then click on the button can not enter the secondary menu or button OK button can not enter the secondary menu

    9. In the menu under the two menu, press the power button down options, this time if the slide TP, press the power button down, there will be a disorder problem

    10. Set the camera to set the camera mode, the photo set to 12M, and then shut down; and then boot, and then open the wifi, mobile phone camera connected wifi, camera crash

    11. Under the Optimize menu, click into the secondary menu and the response speed returned after the second menu selection

    12. Optimize the left and right sliding switch mode speed and camera busy tips too frequently to solve the problem, after optimization, the sliding switch mode should be faster than before 2 to 3 times

    13. solve the problem: in the camera mode, select the watermark off, take pictures out of the picture will still have watermark information

    14. Optimizes Russian translation

    15. solve the connection in the HDMI, the next row of a regular UI will flash the problem

    16. After opening wifi, made a limit, a camera can only be a mobile phone connection, to prevent too many mobile phone camera connected to the camera WIFI problems

    17. Resolve the camera through WIFI start recording, and then click the camera to hide the UI icon, stop recording through APP, click the camera again can not refresh the icon problem

    18. Open the fish eye correction function, gray FOV menu

    19. Since the white balance menu and the color menu in the menu are red, the white menu is grayed out after the white balance is turned on

    20. Modify the translation Delay Capture -> Selfie Timer

    21. Resolves slow motion video settings not being saved issue.

    22. Resolves the smaller font in the menus after screen was scrolled.

    Sept 4 Updates:

    23. Resolves when selecting delete in video playback, the video continues to play, and cannot delete file.

    24. Fixes issue in burst mode when first image has quality issues.

    25. -2X Slow Motion now uses 1080p.

    26. Fixes pixellation (noise) when in 2K issue.

    Go to the Firmware download link on the official support center HERE.
    Andre likes this.

Share This Page