SJ5000X Elite LATEST FIRMWARE UPDATE ver1.5.1 (JUNE 2017)

Discussion in 'SJ5000 Series Firmware' started by sjcam_admin, Jun 13, 2017.

  1. sjcam_admin

    sjcam_admin Administrator Staff Member

    Joined:
    Feb 23, 2017
    Messages:
    126
    Likes Received:
    37
    Trophy Points:
    28
    SJ5000X Elite LATEST FIRMWARE UPDATE ver1.5.1 (JUNE 2017)

    Click HERE to go to the SJ5000X Elite Firmware Update 1.5.1

    Currently the latest stable firmware version for SJ5000X Elite is v1.5.1


    CHANGE LOG SJ5000x Elite:

    ---------------------------------------------------------------------------------

    v1.5.1
    1.Improves App upgrade security and can be future firmware releases can be upgraded via SJCAM Zone (must update to this version though first).
    2. Fixes: 720p connecting to App issue.
    3. Adds: Low Light Mode: When turned off, frames lock. When turned on in the dark, the frames change at night to make the video lighter.
    4) Fixes: OSD conflict with icons.
    5) Fixes: fixes after turning off camera, long press power button causes flashing LED.
    6) Fixes: When in dashcam mode, when power is turned off, there is an extended 10 second period before power off. When in other modes, the camera will stay powered on when being unplugged from power bank.

    ---------------------------------------------------------------------------------
    V1.4.9

    1. Bug correction

    ---------------------------------------------------------------------------------
    V1.4.8
    1. Shortens time to enter preview after recording long exposure
    2. Fixes Time Lapse video record time and App time being different
    3. Re-adds Delayed Capture, Long Exposure functions
    4. Fixes pixels issue when in Delayed Capture, Long Exposure
    5. Upgrades to New UI and New Icons

    ---------------------------------------------------------------------------------

    V1.4.7

    1. Available to make future firmware updates through the APP.
    2. Holding the OK button down for a long time can enable the Hot pixels correction
    3. Updates charging icon to be bigger like SJ6’s.
    4. Adds 1440×1080 4:3 Record
    5. Adds Super View mode 30fps
    6. Adds Delayed Capture, Long Exposure , self time
    7. Modifies the exposure time (real time, such as the choice of 5 seconds exposure time is accurate to 5 seconds, the original 10 seconds to complete)
    8. Boot time to adjust increased – Press 3 seconds to boot (to prevent accidental touch)


    ---------------------------------------------------------------------------------

    V1.4.6 :


    1.Modify the compatibility with the new APP

    ---------------------------------------------------------------------------------

    V1.4.5:


    1. Fixed the Bug of 'not save settings'

    2. Fixed the Problem of 'PC CAMERA'

    3. The hang issue when shooting with Zoom X8 had been fixed in this firmware version.

    ---------------------------------------------------------------------------------


    Before the firmware update, please make sure to use a high quality class 10 memory card, a list of supported cards can be found here:

    https://sjcamsupport.freshdesk.com/...ory-cards-are-recommended-with-sjcam-cameras-


    To upgrade the firmware properly, follow the steps carefully:

    1. Power the camera off.

    2. Remove the MicroSD card from the camera.

    3. Reformat the MicroSD card using the FAT32 file format on your computer*.

    4. Copy the firmware 'bin' file into the MicroSD card, please keep the firmware 'bin' file's name.

    5. Reinsert the SD card to your camera.

    6. Connect the camera with charger, the camera will be upgraded automatically. If your battery was full, you do not need to connect the camera with charger.

    7. After the firmware update was completed, please delete the 'bin' file.


    Click HERE to go to the SJ5000X Elite Firmware Update 1.5.1


    Should you have any questions regarding the firmware update, please submit a ticket or email us at support@sjcamhd.com

     
  2. mac_concon

    mac_concon New Member

    Joined:
    Jul 8, 2017
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Gender:
    Male
    In my camera, when I push the Wifi button with 1.5.1 firmware, I have symptoms of freeze.
    It works properly in 1.4.8 and 1.4.9.2.
    Currently 1.5.1 is giving up and operating at 1.4.9.2.
     
  3. Robert

    Robert New Member

    Joined:
    Jul 20, 2017
    Messages:
    7
    Likes Received:
    1
    Trophy Points:
    3
    Gender:
    Male
    @sjcam_admin

    Is it possible that you are publish beta FW on other sites?
    Some guy found FW v1.5.3 beta on this site:
    poshgadgets.blogspot.com/2017/10/sjcam-sj5000x-elite-v153-firmware.html
     
    Last edited: Oct 26, 2017
    Damian Holt likes this.
  4. Damian Holt

    Damian Holt Moderator

    Joined:
    Sep 4, 2017
    Messages:
    271
    Likes Received:
    52
    Trophy Points:
    28
    Gender:
    Male
    Occupation:
    Retail manager
    Location:
    Uk
    The sjcam app just got updated and has the v1.5.3 listed so I’m assuming it’s no longer a beta.

    The link above mentions some fixes but I’m not entirely sure of the issue in the 1st place. Such as the battery icon fix? What was wrong with it?
     
  5. Robert

    Robert New Member

    Joined:
    Jul 20, 2017
    Messages:
    7
    Likes Received:
    1
    Trophy Points:
    3
    Gender:
    Male
    is it some mistake or really 1.5.1 is last stable version of FW?
    on sjcam official support web site is info:
    "Currently the latest stable firmware version for SJ5000X Elite is v1.5.1"​
    o_O
     
  6. Robert

    Robert New Member

    Joined:
    Jul 20, 2017
    Messages:
    7
    Likes Received:
    1
    Trophy Points:
    3
    Gender:
    Male
    Yes, probably 1-2 pixels on battery icon was dark, that's all :)
    In my opinion will be better to remove bug:
    resetting data and time, and two options/way/possibility with this bug:
    - when I replace battery and don’t touch power button when cam is without battery date and time were not reset (I can touch all buttons but not power),
    - when I replace battery and touch power button when cam is without battery date and time were reset.​
    and this, but probably was removed in FW 1.5.1
    cam turns off automatically after disconnecting power cable (should continue to work on battery);​
    I have to check, in change log is was info:
    6) Fixes: When in dashcam mode, when power is turned off, there is an extended 10 second period before power off. When in other modes, the camera will stay powered on when being unplugged from power bank.​
     
  7. Tripfen

    Tripfen New Member

    Joined:
    Jul 28, 2019
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    1
    Congrats on the new DIY trigger job. My K9 elite trigger was done by Kahr... so my hats off to you for the effort. Its a nice change IMHO that is worth the effort and money.
     

Share This Page