SJ4000 Non-WiFi 2.0" Screen Latest Firmware v1.7 Bug

Discussion in 'SJ4000 Series' started by ilovepc, Aug 17, 2018.

  1. ilovepc

    ilovepc New Member

    Joined:
    Apr 11, 2018
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    "Sharpness" in setting: The opposite effect is set to "strong" and "soft".
    If set to "soft", the actual effect is "strong". If set to "strong", the actual effect is "soft".

    "Rotate" in Settings: When set to On, the recorded video will be flipped upside down, but the screen display will not be turned upside down. This design does not have any benefit, but it will cause the screen display to be reversed when the SJ4000 upside down record a video (such as when using a driving recorder), can not normally view the display and operation.

    The above problems hope to be corrected in the new firmware, thank you!
     
  2. Sulev Svilponis

    Sulev Svilponis Elite

    Joined:
    Aug 11, 2017
    Messages:
    525
    Likes Received:
    111
    Trophy Points:
    43
    Gender:
    Male
    Raise a support ticket in the support section. There is no chance, that they react on problems, that are published only in the forum, for so old camera model. If you will raise a ticket, then you have at least some hope!
     
    Last edited: Aug 18, 2018

Share This Page