Hi. If you udate your camera first time you must first to load the bootloader . Download the file name LD96660A.bin and move it to the formated memory card ( card must be formated in fat32) then put the card into the camera and turn on, after that format card again download the firmware file name sj6cam.bin change the file name to SJCAM001.bin and move to the formated memory card the put it to the camera and turn on the power. The new firmware should be loaded after few sedcond in this process the leds light should be blinking. Thats all it's not complicated. BR Darek
Ciao, grazie per la risposta, ma non funziona. Non era la prima volta che lo eseguivo l'aggiornamento. Ho fatto tutto ciò che hai detto ma non sono andato. The cam bootloader detects and flashes the blue led but when I insert the firmware card, the camera is on but does not activate the installation
I am, all the versions I tried, the cam does not recognize the firmware file from 1.4.6 to 1.4.8 I had no problems
I have tried to update my camera also. I have installed the opener file and the bin file both ways (actually all three by putting a space and no space. I am also getting a camera error from my SD cards saying custer size wrong-please format and also memory error. I have formatted the cards to no avail. Sometimes the camera will give one of the memory errors and not record, or it may actually record but shut off after 2 minutes or 8 minutes. Then once in a while it will actually record without any problems and not shut off. So frustrated.
As already mentioned, I could not install FW 1.5 with SD card, it was not the first update, I already did from 1.4.6 to 1.4.8 and everything worked. I tried all the ways, but it did not go, my SJ6 did not read the file on micro card. At the end I managed to update the cam via the Sjcam Zone app